Dimensions Felt Applique Stocking Kit Giveaway

Posted on December 12, 2012 by Juliet Tiu

Two weeks until Christmas. I imagine lots of scurrying, baking, wrapping. That’s me. No matter what I do, there’s always something else I want to get done, another project, another DIY gift – which brings me to this. This stocking is so cute! And I can’t wait to pull this together with my daughter… a little gift for our newest niece who will be spending Christmas with us.

Love that the kit comes with presorted thread, die-cut felt and a needle. It almost goes without saying that there are easy-to-follow instructions.

Would you like to give these stockings a home?

Two readers will be chosen at random to receive one stocking kit. Just follow below and do leave a comment. Let me know which stocking kit is calling your name… however, no promises if the two of you like the same one. I know, I know, so difficult. This is a quick raffle so I can mail out the kit as soon as the giveaway is over. Of course, after I verify winners. Good luck!!

**UPDATE** If you would prefer NOT to enter through Rafflecopter, just e-mail me at jtiu(at)comcast(dot)net with “Stocking Kit” in the subject line. Good luck!

a Rafflecopter giveaway

Snowflakes Paper Punch Mini Review and Stamps-Stickers Giveaway

Posted on December 11, 2012 by Juliet Tiu

Last week I was playing around with EK Success Snowflake Layering Punch. It’s a dream to use on cardstock, scrapbook paper, even cardboard cereal or snack boxes. I tried it on thin kraft paper and while it punched out a shape just fine, I found the paper too thin and some paper ripped. No fault of the punch. I wouldn’t use it on tissue paper or crepe paper for the same reason. The snowflake punch is available online and in most craft and hobby stores.

The great thing about the paper punch is that you get three different shapes from one punch. You slide a lever for the shape you want. Why would you want all those shapes? You could layer them and get a nice dimensional doo-dad to stick onto a card or scrapbook page.

In my case, I dressed up a plain wrapped gift for my nephew with the punches… I’m trying a minimalist look with kraft paper and yarn. I don’t knit or crochet, but somehow I’ve dug up a few skeins of yarn around here. Weird. But, look, it’s simple and festive. Make your wrapping thematic with any paper punch, or color of yarn.

Along the lines of snowflakes, how would you like to win this gift pack?

It’s from the same fine company who makes the snowflake paper punch… and I really appreciate EK Success for giving me the opportunity to share these cool supplies with you. (Approx. value $45) Just follow the instructions below. You’ll have to comment for a chance to win, and entries will be taken until midnight, 12/15/12. Thanks!

**UPDATE** If you would prefer NOT to enter through Rafflecopter, just e-mail me at jtiu(at)comcast(dot)net with “Snowflake Stamps and Stickers” in the subject line. Good luck!

a Rafflecopter giveaway

Monogrammed Glass Tile Ornament Tutorial

Posted on December 2, 2012 by Juliet Tiu

I love making handmade ornaments to hang on the tree, to use as gift decorations… but I never seem to make enough time to do many. A year ago, I came across an etched glass ornament and thought there could be a less messy option… rub-on letters makes this possible!

Glass tile comes in sheets, and if you’re lucky, you can find a bunch in the clearance section. One sheet can cost about $4 which is inexpensive considering you can make 16-18 ornaments. But I recently found some tile going for under $2! Now a few pieces were chipped, so you have to make sure you check the sheet before you purchase.

What you need
• Glass tile from the home improvement store
• Glass cleaner of choice
• Scissors
• Rub-on letters
• Burnishing tool (popsicle stick will do)
• Ribbon (I used 1/8” and cut into 4”-5” segments)
• Glue (appropriate for glass)
• Optional: decoupage glaze (like Mod Podge or clear acrylic medium), fine-tipped brush

Before you begin, dust off and clean your glass tile. (Materials from the store always come home with a nice layer of dust.)

The tiles are bound together by a mesh and it’s not difficult to cut with a regular pair of scissors. I wouldn’t necessarily use a fancy pair – any office pair will do. The cool part is you can just cut apart what you need and store the rest if you aren’t making a big batch of ornaments.

Cut a pair of matching tiles, or unmatching. I like a matching “sandwich”. After cutting, you’ll need to peel off the mesh. Thankfully, it comes off easily.

Prepare your rub-on letter. I centered the monogram on the very bottom of the tile then when I was happy with the placement, I rubbed (burnished) the letter onto the tile.

No need for drying time at all… you’re done. However, if you’d like, this is when you would use a fine-tipped brush to go over the rub-on letter with a little clear sealer to prevent scratches and “erasing” the letter.

For the hanger take your ribbon, and fold in half. Center it at the top of the tile, and stick in place with a dab of glue. Spread more glue, like you’re dressing a sandwich, then top with another glass tile. Gently press (so you don’t get glue smooshing out) together for a few seconds. Let the glue set at the manufacturers recommended time.

Hang on your tree! Or adorn someone’s gift!

Would love to know about your favorite handmade ornaments… want to share? Two of you will be randomly chosen to receive some fun Jolee’s stickers (the top group and bottom group). Leave a story, a comment (and a link, if you have one) by Tuesday, Dec. 4, 10 PM (central time). Thanks!!!

Making Bottle Cap Magnets: a Mini-Tutorial

Posted on November 14, 2012 by Juliet Tiu

Last week my daughter and I were having fun on Election Night. Here’s the long version of what we were up to. I only call this a mini-tutorial because there’s not a whole lot of science that goes into this. You can make all sorts of miniature art using regular bottle caps… clearly, you can see how much we’ve been holding onto. Stores carry blank bottle caps and bottle cap kits for art and jewelry, too. We gathered all sorts of supplies like sequins, confetti, rhinestones, glitter, scraps of cardstock and patterned paper, newspaper, glue, Mod Podge and magnets.

Just glue and stick your doo-dads… recycle cards, even newspaper ads! They all start to look like potential mini-magnets. (It’s probably easier cutting out circles with a round punch, but I went old school and used my engineering compass.)

While your art is drying, it’s a good idea to weigh them down if the paper starts curling up. Just use a little plastic wrap and coins or, if you’re nerdy like me, little scale weights.

We let our bottle caps dry overnight, then added some Mod Podge dimensional magic to get them glossy and pretty. Glue your magnets and you’re done! You could package a little set as a gift or party favor… I really like this tutorial on glass magnets for packaging.

DIY Decoupage Beer Label Coasters Tutorial

Posted on November 8, 2012 by Juliet Tiu

These are fancy looking, but oh so easy to do with some simple materials. Again, I feel like I need to mention that there are lots of decoupage coaster tutorials out there. All are very searchable, and use everything from color copied photos, scrapbook paper, scrap fabric, wine bottle labels… my coasters use local beer labels. Great gift idea for a host, or that beverage aficionado in your life!

You need:

Water
Tub or mixing bowl large enough to submerge your bottles
4″ x 4″ Stone tiles (found at your home improvement store in the flooring section)
Foam Brush
Mod Podge, or some acrylic decoupage medium
Felt (adhesive-backed)
Optional (but useful): Safety pin or dressmaker pin, plastic card (i.e. used gift card), very fine sandpaper, clear acrylic spray

**OH, when you’re looking at the tiles, check them for chips and dings before you purchase. People pick through them!**

First, you’ll want to remove your labels. I filled our empty beer bottles with water, then submerged the bottles in hot/warm water in a large mixing bowl. Actually, I left it overnight, and in the morning, the labels were super easy to remove. No rips, no shredding. Lay your labels down to dry. (Now go put your glass bottles in the recycling bin…)

Prep your stone tiles by wiping down with a damp towel. They get pretty dusty at the home improvement store. Assuming your labels are dry… use your foam brush and apply a thin coat of Mod Podge to your tiles, nice and easy. Place your labels where you want them, and then press them down firmly.

You’ll get tiny air bubbles, air pockets, because stone tiles are bumpy and porous. Just work out the bubbles gently with your fingers (or plastic card) from the middle of the tile and outward. This is also when you might find a pin handy. I would gently poke the air bubble then push the air out with my finger. Let the tiles dry for about 15 minutes.

After 15 minutes, check your tiles. They will feel tacky, but you can touch them. Add another coat of Mod Podge, and work out the air bubbles, and let dry. Repeat two or three more times. I painted five layers, each time working out any air bubbles with a pin.

Let your tiles dry completely overnight, or 24 hours. If you don’t like the tacky feeling, which I don’t, you can “wet sand” your tiles with very fine sandpaper. I wet a small piece of sandpaper and just went over the tiles. Your decoupaged skin won’t be messed up at all… it will become smooth. Skip the sanding (or not), then just seal with clear acrylic spray, following the manufacturer’s instructions.

Lastly, cut 3-1/2″ x 3-1/2″ felt squares and glue under the tiles, or if it is adhesive-backed, just press into place.